Knowledge base

The problem of resistance to abrasion exists allaround us, and especially in the fields of parquet andplastic flooring.In recent years, the use of UV curable coatings forthese applications has increased significantly.Still, the relationship of abrasion resistance to theother physical properties are not well established.The objective of this paper i

The usage of ultra violet (UV) cured coatings has undergone considerable growth over the last 15-20years. Much of this growth has been at the expense of more traditional solvent borne systems, driven by the trend to reduce solvent emissions and to reduce energy costs associated with cure and application for environmental product improvement. Associ

The first commercial applications for radiation curing were developed in the late 60'sand early 70's. Commercially available oligomers consisted of products which hadbeen developed for thermal (peroxide) free radical cure, primarily unsaturatedpolyesters and vinyl esters (including epoxy acrylates). In the case of the EB linepioneered by Ford, acry

We have investigated the simultaneous polymerization of mixtures of cationically (epoxides orvinylethers) and radically (acrylates) curing components with EB to assess the feasibility of these so called hybrid systems for use in radiation curable coatings which could yield new properties, not accessible by the pure components alone. Also, one syste

The marriage between radiation curing technology and water based resin technologyremains one of the most elegant approaches to yield zero VOC and safe coating systems.It is now 16 years since the first articles on this subject were written, and the advantagesof water based radiation curable systems have been extensively discussed (1, 2, 3, 4).The i

What has happened in the European radiation curing market in the last four years?Since no review paper was prepared for the '93 conference we must go back to excellentreviews on European activities presented in '91(Edinburgh/1) and '92(Boston/2) for reference.The future information service of your association volunteered to answer this questionby t

Today, Rapid Prototyping techniques provide designers with a tangible "hard copy" of a CADdrawing. Although most CAD systems can produce very realistic shaded images of thedesign, a model always gives much more infonnation (e.g. design errors) and is much easierto understand.Stereolithography is the most used Rapid Prototyping technology. About 85

Acylphosphineoxides are well known and commercially accepted for their uniquecuring performance in white pigmented coatings. About ten years ago, 2,4,6-(trimethylbenzoyl)diphenylphosphineoxide (TPO)' was introduced as a first representativeof the mono-acylphosphineoxides. In the late 80's research work was focusedon the improvement of the photoinit