Knowledge base

n the year 1974 the founder of iie, Mr. Ekkehard Kreß worked as a free-lance design engineer on electronic lamp ballasts. Milestones of his developments were:-1976 the first commercial battery ballast for 200W HMI (portable reporter lamp)-1978 1200W HMI lamp ballast (introduction at the Photokina 1978)-1983 microprocessor controlled 1200W HMI lamp

It has been shown that photoinitiators and their decomposition fragments remaining in a UVcured coating can be easily extracted by standard solvents, suggesting that the possibility of contact with food substances is high. Products with a molecular weight below 250 g/mol have been shown to be easily extracted from cured coatings. One strategy to re

In free radical photopolymerization (FRP) or in radical sensitized cationic photopolymerization such as in free radical promoted cationic photopolymerization (FRPCP) [1,2], one usually observes, under air experimental conditions, the presence of an induction period and the decrease of both the polymerization rate and the final conversion. These eff

The advantages of 100 percent (i.e. water and solvent-free) UV curable coating materials comprise to:• high savings of energy during the drying and hardening process which are favourable from both an economic and ecologic point of view,• low requirements in time and space which fit in with the integration into rapidly clocked production processes,•

Recently, as nano technology has developed, there are many effective filler for polymer composites. One of nano sized-fillers which are attractive filler is carbon nano tube (CNT). The CNT can be seen as a graphite sheet rolled in a nanoscale tubular form (single-wall carbon nanotubes, SWNTs) or with additional graphenes tubes around the core of a

There are many reasons the formulator may want to use a filler, either to improve physical properties or to reduce cost, but in clear coatings there is not the luxury of choice open to other sectors of the coatings industry. Some areas where improvements may be required are • Physical durability, improved scratch resistance and abrasion resistance•

Electron beam (EB) technology has been used in converting applications for more than 30 years.The use of EB is driven by a number of factors including: product performance, productconsistency, high throughput, energy savings, and the absence of solvent. The nature of EBtechnology can also enable unique converting applications that are not possible

The Electron Beam (EB) segment of the energy curing adhesives market continues to expand, supported by several factors. The high curing efficiency inherent with EB provides low odor and extractables in food packaging applications and more complete laminate bonding. In addition, the potential for extremely high line speeds coupled with less expensiv